Q2431-90912 Chapter 6 Removing and replacing parts 149
Right-side cover
1. Remove the following assemblies:
● Formatter cover. See “Formatter cover” on page 145.
● Top cover. See “Top cover” on page 146.
2. Release the upper right-side cover-locking tab near the formatter (callout 1).
Figure 79. Right-side cover (1 of 4)
3. Locate the arrow that is embossed on the tray-number indicator. Use a small flat-blade
screwdriver to push in on the lower cover-locking tab to release it.
Figure 80. Right-side cover (2 of 4)
11
To Next Page
Loading...
