Random image repetition
If an image that appears at the top of the page (in solid black) repeats further down the page
(in a gray field), the toner might not have been completely erased from the last job. (The
repeated image might be lighter or darker than the field it appears in.)
● Change the tone (darkness) of the field that the repeated image appears in.
● Change the order in which the images are printed. For example, have the lighter image
at the top of the page, and the darker image farther down the page.
● From your software application, rotate the whole page 180° to print the lighter image first.
● If the defect occurs later in a print job, turn the printer power off for 10 minutes, and then
turn the printer power on to restart the print job.
180 Chapter 4 Problem solving ENWW
To Next Page
Loading...