Clearing jams from the optional envelope-feeder area
This section applies only to jams that occur when you are using an optional envelope feeder.
To clear jams from the optional envelope feeder
1 Remove any envelopes that are loaded in the envelope feeder. Lower the envelope weight and
lift the tray extension up, to the closed position.
2 Press and hold the release button on the left side of the optional envelope feeder. Grasp both
sides of the optional envelope feeder and carefully pull it out of the MFP.
3 Slowly remove any jammed envelopes from the optional envelope feeder and from the MFP.
Jams 339
To Next Page
Loading...