5 If you are using a 3-bin mailbox, the jammed media might be completely inside the device. Open
the jam-access cover that is on the top of the 3-bin mailbox, and carefully pull the jammed media
out of the mailbox.
6 Reinstall the output-bin assembly, the 3-bin mailbox, or the stapler/stacker. Insert the device at
an angle, and then slide it into the MFP.
7 If a jam message persists, jammed media is still in the MFP. Look for the jam in another location.
348 7 Troubleshooting
To Next Page
Loading...