10 Place your forefingers on the blue levers on the bottom of each side of the fuser. Place your
thumbs on the grip points on the top of each side of the fuser. Squeeze the blue levers up, and
remove the fuser from the MFP.
11 Open the black cover at the top of the fuser, and remove the jammed media.
12 Reinstall the fuser. Push on the fuser with your thumbs to be sure it snaps securely into place.
13 To reinstall the fuser-entrance guide, first insert the right-side mounting pin into the hole on the
right side, and then lower the left-side mounting pin into the hole on the left side.
Jams 351
To Next Page
Loading...