Item Options Values Explanation
OUTPUT BIN 3
DUPLEX ON
OFF*
Specify if the duplexer is
included when the test is
performed.
COPIES 1*
10
50
100
500
Specify how many sheets of
paper from the specified
source are sent when the
test is performed.
MANUAL SENSOR TEST See Table 7-22 Manual
sensor test letter
designations for a
description of the alphabetic
code that is associated with
each sensor.
Tests the paper path
sensors and switches for
correct operation. During
this test, the MFP is offline.
On the control-panel display,
each sensor is represented
by a string of letters followed
by a corresponding status
for each sensor.
COMPONENT TEST MAIN MOTOR
DRUM MOTOR
LASER SCANNER MOTOR
MP TRAY SOLENOID
TRAY 2 PAPER FEED
DRIVE
FEED ROLLER CLUTCH
INTERMEDIATE
SWITCHBACK MOTOR
SWITCHBACK MOTOR
OUTPUT MOTOR
DUPLEX MOTOR
FACEUP FACEDOWN
SOLENOID
ALIENATION SOLENOID
REPEAT
Use the component test to
exercise individual parts one-
at-a-time, so that you can
determine the cause of
noise inside the MFP.
PRINT/STOP TEST STOP TIME 0 to 60000 Use this menu to isolate the
potential source of print-
quality problems with the
MFP. The time is expressed
in milliseconds.
Tools for troubleshooting 421
To Next Page
Loading...