Diagnostics menu
The following table shows the items that are available in the DIAGNOSTICS menu. Values that have
an asterisk are the default values.
Item Options Values Explanation
PRINT EVENT LOG Generates a localized list of
the 50 most recent entries in
the error log. For each entry,
the printed event log shows
the error number, page
count, error code, and
description or personality.
SHOW EVENT LOG At the control panel, scroll
through the contents of the
event log, which lists the 50
most recent events.
CALIBRATE SCANNER Use this item to calibrate the
scanner. You might need to
calibrate the scanner if it is
not capturing the correct
sections of scanned
documents.
PAPER PATH SENSOR
TEST
See Table 7-21 Paper-path
sensor letter designations
for a description of the
alphabetic code that is
associated with each sensor.
Initiates a paper-path-sensor
test. You can then open the
menus to print internal
pages (including the paper
path test), set menu items,
and send jobs from the
computer. The sensors are
updated as paper passes
each sensor.
On the control-panel display,
each sensor is represented
by a string of letters followed
by a corresponding status
for each sensor.
PAPER PATH TEST PRINT TEST PAGE Generates a test page that
is useful for testing the
paper handling features of
the MFP.
Specifies which paper paths
are tested.
SOURCE ALL TRAYS
TRAY 1
TRAY 2*
TRAY <N>
Specify whether to print a
test page from a specific tray
or from all trays.
DESTINATION ALL BINS
OUTPUT BIN 1*
OUTPUT BIN 2
Specify which output bin to
use during the paper path
test.
420 7 Troubleshooting
To Next Page
Loading...