HP LaserJet 4345mfp Series - MFP Specifications

MFP specifications
Electrical specifications
WARNING! Power requirements are based on the country/region where the MFP is sold. Do
not convert operating voltages. This can damage the MFP and void the product warranty.
Table 1-5 Power requirements (HP LaserJet 4345mfp Series)
Specification 110-volt models 230-volt models
Power requirements 100 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)
220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
Rated current 15.0 Amps 8.0 Amps
Table 1-6 Power consumption HP LaserJet 4345mfp Series (average, in watts)
Product model Copying
Printing
2
Ready Sleep Off
HP LaserJet 4345mfp 800 W
790 W
3
44 W 15 W 0.25 W
HP LaserJet 4345x mfp 800 W
790 W
3
49 W 15 W 0.25 W
HP LaserJet 4345xs mfp 800 W
790 W
3
49 W 15 W 0.25 W
HP LaserJet 4345xm mfp 800 W
790 W
3
49 W 15 W 0.25 W
1
Values subject to change. See www.hp.com/support/lj4345mfp for current information.
2
Power numbers are the highest values measured using all standard voltages.
3
HP LaserJet 4345mfp Series printing and copying speeds are 45 ppm Letter size and 43 ppm A4 size.
4
Default time from Ready mode to Sleep = 60 minutes.
5
Recovery time from Sleep to start of printing = less than 10 seconds.
6
Heat dissipation in Ready mode = 167 BTU/hour.
MFP specifications 17