HP LaserJet 4345mfp Series - Page 48

Acoustic specifications
Table 1-7 Sound power and pressure level
1
(HP LaserJet 4345mfp Series)
Sound power level Declared per ISO 9296
Printing
2
L
WAd
= 7.0 Bels (A) [70 dB(A)]
Copying
L
WAd
= 7.2 Bels (A) [72 dB(A)]
Ready
L
pAm
=33 dB (A)
Sound pressure level Declared per ISO 9296
Printing
2
L
pAm
=55 dB (A)
Copying
L
pAm
=56 dB (A)
Ready
L
pAm
=33 dB (A)
1
Values subject to change. See www.hp.com/support/
lj4345mfp for current information.
2
HP LaserJet 4345mfp Series speed is 43 ppm A4 size.
3
Configuration tested (HP LaserJet 4345mfp): Base model,
simplex printing with A4 paper size.
Image area
The MFP can place printed or copied images on the page within the following margins:
■ Printing: 4.23 mm (0.17 inch) from each edge
■ Copying (standard): 4.23 mm (0.17 inch) from each edge
■ Copying (edge-to-edge): 2.0 mm (0.08 inch) from each edge
To use edge-to-edge copying, touch CONFIGURE DEVICE, touch SYSTEM SETUP, touch COPY/
SEND SETTINGS, and then touch EDGE-TO-EDGE COPIES.
NOTE Using edge-to-edge copying as the default setting can result in printing off the page.
This can cause print-quality defects and can cause damage to the MFP internal components.
NOTE Margins vary when using digital sending. The margins depend on the type of file
being sent and its dpi resolution.
Skew specifications
The MFP has the following skew specifications:
■ Print engine (cut-sheet paper): less than 1.5 mm (0.06 inches) over a 260-mm (10.24-inch) length
■ Print engine (envelopes): less than 3.3 mm (0.13 inches) over a 220-mm (8.66-inch) length
■ ADF and scanner glass (cut-sheet paper): less than 0.6%
18 1 Product information