To lock the control-panel menus
1 Open the HP Web Jetadmin program.
2 Open the DEVICE MANAGEMENT folder in the drop-down list in the Navigation panel.
Navigate to the DEVICE LISTS folder.
3 Select the MFP.
4 In the Device Tools drop-down list, select Configure.
5 Select Security from the Configuration Categories list.
6 Type a Device Password.
7 In the Control Panel Access section, select Maximum Lock. This prevents unauthorized users
from gaining access to configuration settings.
Locking the formatter cage
You can place a Kensington lock on the formatter cage to prevent unauthorized access to
components on the formatter.
NOTE A Kensington lock is typically used for locking laptop computers in order to prevent
theft.
The following figure indicates where you should place the lock.
Security features 53
To Next Page
Loading...