Cleaning the ADF delivery system
Clean the ADF only if it is visibly marked or dirty, or if you are experiencing a decrease in copy
quality (such as streaking).
To clean the ADF delivery system
1 Open the scanner lid.
2 Locate the white, vinyl ADF backing.
3 Locate the white, vinyl calibration strips.
4 Clean the ADF backing and the calibration strips by wiping them with a clean, damp, lint-free
cloth. Use an ammonia-based surface cleaner only when a water-dampened cloth does not
clean the ADF components.
5 Clean the scanner glass by wiping it gently with a clean, slightly damp, lint-free cloth. Use an
ammonia-based surface cleaner only when a water-dampened cloth does not clean the scanner
glass.
58 4 Maintenance
To Next Page
Loading...