6 Close the scanner lid.
To clean the ADF rollers
You should clean the rollers in the ADF if you are experiencing misfeeds or if your originals show
marks as they exit the ADF.
CAUTION Clean the rollers only if you experience misfeeds or marks on the originals, and
you notice dust on the rollers. Cleaning the rollers frequently could introduce dust into the
device.
1 Open the scanner lid.
2 Locate the rollers near white, vinyl calibration strips.
3 Wipe the rollers gently with a clean, water-dampened, lint-free cloth.
CAUTION Do not pour water directly onto the rollers. Doing so might damage the device.
Cleaning the MFP 59
To Next Page
Loading...