Functional Overview
Formatter System
EconoMode
The EconoMode setting uses approximately 50% less toner than
standard mode printing by reducing the dot density. EconoMode,
which can also be thought of as “draft mode,” is user selectable via
a front panel key (LaserJet 4P/4MP only), or via a PJL sequence
using HP Explorer’s Remote Control Panel, or through application
software. The default setting is Off.
Normal Mode, Medium Density
__*------
_*.-*---@*g*
● O....*--*----’”
EconoMode, Medium Density
● -m---e
Figure 5-7
EconoMode vs. Regular Print
—
Note
EconoMode does not affect print speed or
memory usage.
—
5-18
To Next Page
Loading...