Removal and Replacement
Required Took
Required Tools
#2 Magnetized Phillips Screwdriver (6-inch shaft)
Small flat-blade Screwdriver
Small Pair Needle Nose Pliers
All screws used in the printer are Phillips head screws which
require a #2 size Phillips screwdriver. Figure 6-1 shows the
difference between a Phillips and a Pozidriv screwdriver. Note
that the Phillips tip has more beveled surfaces.
CAUTION
A Posidriv screwdriver will damage the printer’s
screw heads. Use Phillips only.
Phillips Posidriv
Flglm 5-’1
Phillipsvs. Posidriv Screwdrivers
6-3
To Next Page
Loading...