Removal and Replacement
Cover and Doors
●
Printer Cover (LaserJet 4P/4MP)
●
1. Unplug the power cord and interface cable(s).
2. Remove the toner cartridge and paper cassette.
●
CAUTION
Steps 3 and 4 are critical to avoid damage to the
SIMMS, the Formatter PCA, and cabling.
3. Remove the SIMM access panel and any installed SIMM
modules (Figure 6-3).
4. Unplug the front panel cable connector (to the right of the
topmost SIMM slot on the Formatter PCA - Figure 6-7).
m
F@m: &7
C.WWOIPanelConnector bxdcm (LaserJet 4W41W)
●
(continued on next page)
6-9
To Next Page
Loading...