Removal and Replacement
Coverand Doors
6. With the Rear Door open, pull the lower rear tabs outward,
away from the printer and lift upward slightly (Figure 6-6).
Figure 696
Releasing the Printer !XIwr Flew Tabs
7.
8.
Place a small object under the rear of the cover to keep it from
snapping back in place. Pull the front lower front tabs outward,
away from the printer chassis as in step 6 above.
Grasping the front and rear, lift the cover straight up, being
careful to not catch any other assemblies while lifting.
CAUTION
Tore-install:
Avoid holding the cover by the more flexible left
and right sides. Be careful to avoid catching the
green Fuser Release Tab at the rear of the
printer while lifting the cover off.
When reinstalling the Printer Cover, be sure the rear door is open.
Lower the cover straight downward to avoid catching any parts.
6-8
To Next Page
Loading...