HP LaserJet 4L - Page 154

Removal and Replacement
Cover and Doors
Printer Cover (LaserJet 41J4ML)
●
1. Remove the Power Door and unplug the power cord (Figure 6-4).
2. Remove the toner cartridge and paper cassette.
3. Remove any optional memory card (Figure 6-2).
●
CAUTION
Step 3 is critical to avoid darnage to the memory
card, the Formatter PCA, and the DC Controller.
4. Unplug the parallel cable.
5. Remove the (4) self-tapping printer cover screws (Figure 6-5,
callout 1).
Figure 6-5
Fbncwing W Prinkr flow Screws (LaserJet 4L/4ML)
(continued on next page)
6-7