Removal and Replacement
Front Assemblies
Front Assemblies
Front Oblique Roller Assembly
The Front Oblique Roller Assembly is located on the front of the
printer, and is accessible after removing the Paper Cassette. It can
be removed without removing the Printer Cover.
1. Remove the Paper Cassette.
2. Remove the (1) self-tapping screw on the left of the Front
Oblique Roller Assembly and tilt the assembly out at the
bottom to remove (Figure 6-18, callout 1).
Figure 6-l El Removing the Oblique Roller Assembly
6-20
To Next Page
Loading...