Removal and Replacement
Rear Assemblies
Pressure Roller
● ’
NOTE
The plastic bushings under each end of the
Pressure Roller can fall out of place and be
easily lost.
●
1. The Pressure Roller is now free. Grasp both ends and lift it out.
Delivery Assembly
1. Pull out gently on the metal frame on either end of the Delivery
Assembly to release the mounting pins. Lift the assembly out
(Figure 6-30).
Figure 6-30 Removing the F’user Delivery
Assembly
●
Tore-install:
Ensure that the assembly is installed with its white plastic
pressure rollers toward the back of the Fusing Assembly,
●
adjacent to the Lower Delivery Rollers. It is possible to
install the Delivery Assembly backwards.
6-33
To Next Page
Loading...