Installation and Configuration
Unpacking and Installation
Unpacking and Installation
Before unpacking the printer, inspect the shipping container for
signs of physical damage. Since a damaged shipping box is an
indication of improper handling during shipping, the printer may
also be damaged.
Note
If the shipping container has any sign of
damage, unpack and power the printer ON with
the carrier’s agent present. If the printer
appears damaged or fails self test, do not
accept it.
A. Choose the best location.
Verify that the printer location meets all requirements listed in
Chapter 2.
B. Unpack the printer.
1.
2.
3.
4.
5.
6.
.
Remove the power cord, the manuals, and the toner package.
Remove the printer from its box.
Remove the outer packing material from the printer.
Open the printer top door by pressing the door release button
on the right side of the printer (see Chapter 1, Figure 1-2 or 1-3
for location).
Pull out the paper cassette.
Remove the packing spacers from the inside of printer (2 on the
Transfer Roller) and from the paper cassette (2).
3-2
To Next Page
Loading...