Installation and Configuration
Wy3acking and installation
C. Check package contents.
Nate
If any of the package contents are missing or
damaged, contact your HP dealer immediately.
The package should include the following:
● Printer.
. Power cord.
. Software Solutions package.
● User’s Manual.
● Toner cartridge.
Note
D. Install the
1.
2.
3.
4.
5.
—
Interface cables are sold separately. Refer to
Chapter 8 for part numbers.
toner cartridge.
Press the top door release button to open its top door.
Remove toner cartridge from its box and cut it open. Save the
packing materials for possible cartridge storage.
Shake the cartridge vigorously to distribute the toner evenly
inside the cartridge (see Figure 2-2 in Chapter 2).
Grasp the toner sealing tape tab on the right side of the
cartridge. Pull firmly to remove the strip of sealing tape.
Grasp the plastic cartridge body (not the metal shutter
linkage), and slide the cartridge into the printer, pushing it
firmly into place. Close the top door.
3-3
To Next Page
Loading...