HP LaserJet 5 - Loading Media and Powering On; Load Paper into Tray 2

Step 6. Load Paper into Tray 2
Tray 2 holds about 250 sheets of 20#
(75g/m
2
) paper.
1 Slide Tray 2 out of the printer.
2 Load up to 250 sheets of paper into
the tray. Do not fill above the arrows
on the left rear. Keep the paper
below the tabs in the rear of the tray.
3 Make sure that the paper is flat in the
tray at all four corners. The paper
should fit under the front left metal
holder.
4 Slide Tray 2 back into the printer.
Note
See the sections on letterhead and duplex
printing in Chapter 4 of the User’s
Manual for proper media orientation for
specific jobs.
Caution
Do not remove the tray while the printer
is printing. This could cause a paper jam.
10 Getting Started Guide EN