EN
Specifications A-13
Card Stock Construction
•
Smoothness:
36-53 lb (135-199 g/m
2
) card stock should have a
smoothness rating of 100-180 Sheffield. 16-36 lb (60-135 g/m
2
)
card stock should have a smoothness rating of 100-250 Sheffield.
•
Construction:
Card stock should lie flat with less than 0.2 inch
(5 millimeters) of curl.
•
Condition:
Make sure card stock is not wrinkled, nicked, or
otherwise damaged.
•
Sizes:
Use only card stock within the following size ranges:
•
minimum: 3 by 5 inches (76 by 127 mm)
•
maximum: 12.28 by 18.5 inches (312 by 470 mm)
Note
Before loading card stock in Tray 1, make sure it is regular in shape
and not damaged. Also, make sure the cards are not stuck together.
Card Stock Guidelines
•
If cards curl or jam, try printing from Tray 1 and opening the rear
output bin.
•
Set margins at least 0.08 inch (2 mm) away from the edges of the
paper.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
