B-20 Control Panel Menus
EN
Resets Menu
Use this menu with caution. You can lose buffered page data or
printer configuration settings when you select these items. Only
reset the printer under the following circumstances:
•
You want to restore the printer’s default settings.
•
Communication between the printer and computer has been
interrupted.
•
You are using both the serial and parallel I/O ports, and one of
the ports is having problems.
The items in the Resets Menu will clear all memory in the printer,
while
[Cancel Job]
clears only the current job.
Resets Menu
Item Explanation
RESET MEMORY
This item clears the printer buffer and the active I/O input buffer, and
makes the control panel defaults current.
The
DATA RECEIVED
message might display on the control panel.
Resetting memory during a print job can result in data loss.
RESTORE FACTORY
SETTINGS
This item performs a simple reset and restores most of the factory
(default) settings. This item also clears the input buffer for the active
I/O.
The
DATA RECEIVED
message might display on the printer’s
control panel.
RESET ACTIVE I/O
CHANNEL
This item performs a simple reset and clears the input and output
buffers (for the active I/Os only).
The
DATA RECEIVED
message might display on the printer’s
control panel.
RESET ALL I/O
CHANNELS
This item performs a simple reset and clears the input and output
buffers for all I/Os.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
