EN
Printer Memory and Expansion C-5
Checking Memory Installation
Follow this procedure to verify that DIMMs are installed correctly:
1
Check that the printer’s control panel displays
READY
when the
printer is turned on. If an error message appears, a DIMM might
have been incorrectly installed. Check the printer messages
(page 79).
2
Print a new configuration page (page 101).
3
Check the memory section on the configuration page and
compare it to the configuration page printed before the DIMM
installation. If the amount of memory has not increased, the DIMM
might not be installed correctly (repeat the installation procedure)
or the DIMM might be defective (try a new DIMM).
Note
If you installed a printer language (personality), check the Installed
Personalities and Options section on the configuration page. This
area should list the new printer language.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
