EN
Regulatory Information E-3
The design of the printer facilitates the recycling of:
Plastics Europe Only: Plastic parts have material identification markings, according
to international standards, which enhance the ability to identify plastics for
proper disposition at the end of the printer’s life. The plastics used in the
printer housing and chassis are technically recyclable.
All Other Countries/Regions: Plastic parts have material identification
markings, according to international standards, which enhance the ability
to identify plastics for proper disposition at the end of the printer’s life.
HP Toner
Cartridges/
Photo-
conductive
Drum
In many countries/regions, the toner cartridge/drum can be returned to HP
at the end of its useful life. A prepaid shipping label and instructions on how
to return the toner cartridge/drum are included with the replacement toner
cartridge/drum. If your country/region is not listed in the replacement’s
brochure, call your local HP Sales and Service Office for further instructions.
(See page 110 or the HP support pages at the front of this user’s guide.)
HP Cartridge Recycling Program Information
Since 1990, the HP LaserJet Toner Cartridge Recycling Program has
collected more than twelve million cartridges that otherwise would have
been discarded into landfills or similar facilities. This rapidly growing
program returns used cartridges to the manufacturing process, thus
conserving a variety of resources. Once a cartridge is returned through the
prepaid return program, it is disassembled. The reusable components and
the plastic housing are cleaned and inspected for quality conformance. After
passing strict inspection procedures, materials such as nuts, screws, and
clips are reclaimed and used to produce new cartridges. Remaining
materials, like the photoconductive drum, are melted down and used as raw
materials for a variety of other products. By the weight of the materials
returned, over 95% are recycled. All HP LaserJet toner cartridges are
shipped in recycled boxes with the entire box being recyclable through the
returns program. Styrofoam end caps, which were used to support HP
LaserJet toner cartridges during shipping, have been replaced with molded
end caps made from 100% post-consumer paper products. For more
information in the U.S., call (1) (800) LASERJET [(1) (800) 527-3753].
International customers can call their local HP Sales and Service Office for
further information regarding the HP Toner Cartridge Recycling Program
(page 110).
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
