EN
Chapter 1: Printer Basics 17
Software for Windows
Use the
Typical Install
or
Custom Install
option to install the HP
software. (This includes several printer drivers. For more
information, see page 15.)
Note
Network Administrators: If the printer is attached to a network,
before you can print, the printer must be configured for that network
using HP JetAdmin or similar network software. (See the getting
started guide.)
Access the Windows Printer Driver
To configure the driver, access it in one of the following ways:
Note
Settings in the printer driver and software application override
control panel settings. (Software application settings override
printer driver settings.)
Operating System
Temporarily Change Settings
(from a software application)
Change Default Settings
(across all applications)
Windows 95 and
Windows NT 4.0
From the
File
menu, click
Print
,
and then click
Properties
. (The
actual steps can vary; this is the
most common method.)
Click the
Start
button, point to
Settings
, and then click
Printers
.
Right-click the printer icon, and
choose
Properties
.
Windows 3.1x and
Windows NT 3.51
From the
File
menu, click
Print
,
click
Printers
, and then click
Options
. (The actual steps can
vary; this is the most common
method.)
From the Windows control panel,
double-click
Printers
, highlight
the printer, and click
Setup
.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
