EN
Chapter 4: Problem Solving 81
FLASH IS
WRITE PROTECTED
The flash disk DIMM is protected, and no new files can be written to it.
Disable the write protection through HP JetAdmin.
INPUT DEVICE
CONDITION xx.yy
An input paper handling device has a condition that needs attention
before printing can resume.
See the documentation that came with the paper handling device for
assistance.
INSTALL FRONT
DUPLEX COVER
The printer is unable to print the current job, because the duplexer’s
front cover is not installed, or not inserted correctly.
Re-insert the duplexer’s front cover.
INSTALL TRAY x
The printer is unable to print the current job, because the specified
tray (
x
) is open or not inserted correctly.
Re-insert the specified tray.
LOADING
PROGRAM <number>
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the printer’s file system. At
bootup time these entities are loaded into RAM. (These entities can
take a long time to load into RAM depending on the size and number
of entities being loaded.) The
<number>
specifies a sequence
number indicating the current program being loaded.
MANUALLY FEED
[TYPE] [SIZE]
Load the requested paper into Tray 1.
Press
[Go]
if the desired paper is already loaded in Tray 1.
Press
[-Value+]
to scroll through the available types and sizes. Press
[Select]
to accept the alternate type or size.
MEMORY FULL
STORED DATA LOST
There is no available memory in the printer. The current job might not
print correctly and some resources (such as downloaded fonts or
macros) might have been deleted.
You might want to add more memory to the printer (page C-1).
Printer Messages (Continued)
Message Explanation or Recommended Action
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
