Duplexer feed motor
1. Remove the following components:
●
Duplexer right cover. See
Duplexer right cover on page 157.
●
Duplexer left cover. See
Duplexer left cover on page 156.
●
Duplexer top cover. See
Duplexer top cover on page 158.
●
Duplexer back cover. See
Duplexer back cover on page 159.
2. Remove two screws (callout 1) and one duct (callout 2).
Figure 5-165 Removing the duplexer feed motor (1 of 5)
ENWW Duplexer 161
To Next Page
Loading...