HP LaserJet 5200 - Page 187

Duplexer PCA
1. Remove the following components:
●
Duplexer right cover. See
Duplexer right cover on page 157.
●
Duplexer left cover. See
Duplexer left cover on page 156.
●
Duplexer top cover. See
Duplexer top cover on page 158.
2. Remove two screws (callout 1) and one duct (callout 2).
Figure 5-175 Removing the duplexer PCA (1 of 3)
3. Disconnect six connectors (callout 3).
Figure 5-176 Removing the duplexer PCA (2 of 3)
ENWW Duplexer 167