8. Remove four silver screws (callout 9), one black screw (callout 10), and then hold the 500-sheet
feeder pickup solenoid (callout 11) and drive unit (callout 12) together while removing them.
Figure 5-204 Removing the 500-sheet feeder drive unit (6 of 7)
9. Remove the 500-sheet feeder pickup solenoid (callout 13) from the drive unit (callout 14).
Figure 5-205 Removing the 500-sheet feeder drive unit (7 of 7)
ENWW 500-sheet feeder 185
To Next Page
Loading...