Item Values Explanation
all the characters in a font. PC-8 or PC-850 is recommended for
line-draw characters.
APPEND CR TO LF: Select YES to append a carriage return to
each line feed that the printer encountered in backward-
compatible PCL jobs (pure text, no job control). Some
environments, such as UNIX, indicate a new line using only the
line feed control code. Use this option to append the required
carriage return to each line feed.
SUPPRESS BLANK PAGES: When generating your own PCL,
extra form feeds are included that would cause one or more blank
pages to be printed. Select YES for form feeds to be ignored if the
page is blank.
MEDIA SOURCE MAPPING: Allows you to select and maintain
trays by number when you are not using the printer driver or when
the software program has no option for tray selection. CLASSIC:
Tray numbering is based on LaserJet 4 and older models.
STANDARD: Tray numbering is based on newer LaserJet
models.
Print Quality submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer-driver settings override control-panel settings. For more information,
see
Printer drivers on page 10. In general, it is best to change these settings in the printer driver, if
applicable.
Item Values Explanation
SET REGISTRATION PRINT TEST PAGE
SOURCE
ADJUST TRAY X
ADJUST TRAY X: Shifts the margin alignment to center the
image on the page from top to bottom, and left to right. You
can also align the image that is printed on the front with the
image that is printed on the back. Allows for one-sided and two-
sided printing alignment.
PRINT TEST PAGE: Prints a test page that shows the current
registration settings.
SOURCE: Selects the tray for which you want to print the test
page.
The default setting for SOURCE is TRAY 2. The default setting
for ADJUST TRAY 1 and ADJUST TRAY 2 is 0.
ADJUST TRAY [N]: Sets the registration for the specified tray,
where [N] is the number of the tray. A selection appears for
268 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...