HP LaserJet 5200

paper trays, and DIMMs. If the environment supports bidirectional communication, the installer presents
Driver Autoconfiguration as an installable component by default for a typical installation and for a custom
installation.
NOTE The duplexer and 500-sheet input tray (tray 3) are not available for the HP LaserJet
5200L.
Update Now
If you have modified the configuration of the HP LaserJet 5200 Series printer since installation, the driver
can be automatically updated with the new configuration in environments that support bidirectional
communication. Click the Update Now button to automatically reflect the new configuration in the driver.
NOTE The Update Now feature is not supported in environments where shared Windows 2000
or Windows XP clients are connected to Windows 2000 or Windows XP hosts.
HP Driver Preconfiguration
HP Driver Preconfiguration is a software architecture and set of tools that you can use to customize and
distribute HP software in managed corporate printing environments. Using HP Driver Preconfiguration,
information technology (IT) administrators can preconfigure the printing and device defaults for
HP printer drivers before installing the drivers in the network environment. For more information, see
the HP Driver Preconfiguration Support Guide, which is available at
www.hp.com/support/lj5200.
Additional drivers
The following drivers are not included on the CD, but are available from www.hp.com/go/
lj5200_software.
●
UNIX® model scripts
●
Linux drivers
ENWW Printer software 11