Checking CompactFlash installation
After installing the CompactFlash card, make sure that the installation was successful.
To verify that CompactFlash cards are installed correctly
1. Turn the printer on. Check that the Ready light is illuminated after the printer has gone through the
startup sequence. If an error message appears, a CompactFlash card might have been incorrectly
installed.
2. Print a configuration page (see
Configuration pages on page 283).
3. Check the installed personalities and options section on the configuration page and compare it to
the configuration page that was printed before to verify CompactFlash installation. If there is not
any information on the installed CompactFlash card, repeat the installation procedure. If necessary,
install a different CompactFlash card.
NOTE If you installed a printer language (personality), check the "Installed Personalities and
Options" section on the configuration page. This area should list the new printer language.
ENWW Checking CompactFlash installation 39
To Next Page
Loading...