4. Grasp both sides of the print cartridge and distribute the toner by gently rocking the print cartridge.
CAUTION Hold the print cartridge by the end caps.
5. Remove the shipping tape from the new print cartridge. Discard the shipping tape according to
local regulations.
6. Align the print cartridge with the tracks inside the printer, and, using the handle, insert the print
cartridge until it is firmly seated, and then close the front door.
After a short time, the control panel should display Ready.
7. Installation is complete. Place the used print cartridge in the box in which the new cartridge arrived.
See the enclosed recycling guide for recycling instructions.
8. If you are using a non-HP print cartridge, check the printer control panel for further instructions.
46 Chapter 3 Maintenance ENWW
To Next Page
Loading...