HP LaserJet 5200

Figure 4-6 Pickup-and-feed-system
Cassette (tray 2) pickup mechanism
When tray 2 is correctly installed, SW detects its presence. The cassette paper sensor (SR2) detects
whether media is in the cassette, and the cassette media sensor detects the type of media. When tray 2
is correctly installed and contains the correct media type, the pickup operation begins.
1. The DC controller receives a print command from the formatter, and then begins rotating the pickup-
and-feed motor (M1) at the correct speed for the media type.
2. After the motor reaches the correct speed and the fuser reaches the correct temperature, the
cassette pickup solenoid (SL1) turns on and the cassette pickup roller begins rotating.
ENWW Pickup-and-feed-system 57