Maintenance
To prevent excessive wear and preserve
print quality, keep your printer and
scanner free of excessive dust and debris.
Cleaning Your HP LaserJet
6L Printer
Note
If you notice excessive amounts of toner
inside your printer, your toner cartridge
may be defective. It is recommended that
you use HP LaserJet toner cartridges to
insure high quality printing and to reduce
incidents of excessive toner in your printer.
WARNING!
Before cleaning the printer, disconnect it
from the power source.
Caution
Using ammonia-based cleaners on or
around the printer can cause damage to
the printer. Also, do not touch the black
sponge roller inside the printer. By doing
so, you can reduce the print quality of
your media.
To clean the printer
1 Clean the outside of the printer with a
slightly damp cloth (use only water).
2 Clean the inside of the printer with a
dry, lint-free cloth. Remove all dust,
spilled toner, and particles of paper.
Note
If toner gets on your clothing, wipe it off
with a dry cloth and wash clothing in cold
water. Hot water sets toner into the fabric.
5-28 Troubleshooting and Maintenance EN
To Next Page
Loading...