ENWW Loading input trays 39
13 Press M
ENU to exit the menus. The tray is ready to use.
Loading Trays 2, 3, and 4
The 500-sheet input trays (Trays 2 and 3) come with the printer. Tray 4 is an optional tray that
holds up to 2,000 sheets of standard-size paper. For paper specifications, see Paper
specifications.
To load detectable, standard-size paper in Trays 2, 3, and 4
Follow this procedure to load detectable standard-size paper in the tray. The following are the
detectable sizes, which are marked inside the tray:
● A4
● Letter
● A3
● Legal
● 11 x 17
● Executive
● B4 (JIS)
● B5 (JIS)
● A4-Rotated
● Letter-Rotated
CAUTION To avoid a jam, never add or remove paper from a tray while printing from that tray.
1 Open the tray until it stops.
2 Adjust the left (Y) paper guide by pressing the tab on the guide and set the guide to the
correct paper size.
To Next Page
Loading...