HP LaserJet 9050 - Page 71

ENWW Printing both sides of paper (duplexing) 69
Layout options for printing on both sides of paper
The four print layout options are shown below. Select the binding and orientation options for this
printer from the Print dialog box, if possible. The terminology in the Print dialog box for the
binding edge might be different than the terms that are listed here.
If you cannot set these options from the Print dialog box, set them from the control panel. Select
the Configure Device menu, select the Printing menu, select DUPLEX BINDING or
ORIENTATION, and then select the layout option that you want.
2. Long-edge
landscape
1. Long-edge
portrait (default)
3. Short-edge
portrait
4. Short-edge
landscape
Printing left-to-right
Printing right-to-left
1. Long-edge
portrait (default)
3. Short-edge
portrait
2. Long-edge
landscape
4. Short-edge
landscape