HP LASERJET CM2320

Supported paper types and tray capacity
Media type Dimensions
1
Weight Capacity
2
Paper orientation
Paper, including the
following types:
●
Plain
●
Letterhead
●
Color
●
Preprinted
●
Prepunched
●
Recycled
Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 216 x 356 mm
(8.5 x 14 inches)
60 to 90 g/m
2
(16 to 24 lb)
Tray 1: up to 50 sheets
Trays 2 and 3: up to 250
sheets of
75 g/m
2
(20 lb bond)
Side to be printed on face-
up, with the top edge at
the back of the tray
Thick paper Same as for paper
Up to 200 g/m
2
(53 lb)
Tray 1: single sheet only
Trays 2 and 3: up to
25 mm (0.98 inch) stack
height
Side to be printed on face-
up, with the top edge at
the back of the tray
Cover paper Same as for paper
Up to 200 g/m
2
(53 lb)
Tray 1: single sheet only
Trays 2 and 3: up to
25 mm (.98 inch) stack
height
Side to be printed on face-
up, with the top edge at
the back of the tray
Glossy paper
Photo paper
Same as for paper
Up to 220 g/m
2
(59 lb)
Tray 1: single sheet only
Trays 2 and 3: up to
25 mm (.98 inch) stack
height
Side to be printed on face-
up, with the top edge at
the back of the tray
Transparencies A4 or Letter Thickness: 0.12 to
0.13 mm (4.7 to 5.1 mils)
Tray 1: single sheet only
Trays 2 and 3: up to
25 mm (.98 inch) stack
height
Side to be printed on face-
up, with the top edge at
the back of the tray
Labels
3
A4 or Letter Thickness: up to 0.23 mm
(9 mils)
Tray 1: single sheet only
Trays 2 and 3: up to
25 mm (.98 inch) stack
height
Side to be printed on face-
up, with the top edge at
the back of the tray
Envelopes
●
COM 10
●
Monarch
●
DL
●
C5
●
B5
Up to 90 g/m
2
(24 lb)
Tray 1: up to 10 envelopes
Trays 2 and 3: up to 30
envelopes
Side to be printed on face-
up, with the stamp-end at
the back of the tray
Postcards or index cards 100 x 148 mm
(3.9 x 5.8 inches)
Tray 1: single sheet only Side to be printed on face-
up, with the top edge at
the back of the tray
ENWW Supported paper types and tray capacity 57