When multiple supplies are low, more than one event code is recorded.
◦
10.00.70 (event code)
Black print cartridge
◦
10.01.70 (event code)
Cyan print cartridge
◦
10.02.70 (event code)
Magenta print cartridge
◦
10.03.70 (event code)
Yellow print cartridge
◦
10.23.70 (event code)
Fuser kit
◦
10.22.70 (event code)
Transfer kit
Recommended action
If print quality is no longer acceptable, replace the supply.
Hp recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty ends.
A second USB wireless networking accessory has been detected
Description
This message appears on the control panel when more than one USB wireless product is attached to the
product.
Recommended action
The use of more than one wireless USB product is not supported. Remove one of the wireless USB
products.
Bad optional tray connection
Description
The optional tray is not connected, not connected correctly, or a connection is not working correctly.
290 Chapter 2 Solve problems ENWW
To Next Page
Loading...