Recommended action
1. Turn the product off.
2. Remove and reinstall the optional tray.
3. Reconnect connectors for the tray.
4. Turn the product on.
Card slot device failure To clear touch “Clear”
Description
The specified device has failed.
Recommended action
Touch the Clear button to clear the error.
Card slot file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Touch the Clear button to clear the error.
Card slot file system is full To clear touch “Clear”
Description
A PJL file system command could not store something on the file system because the file system was full.
Recommended action
Touch the Clear button to clear the error.
Card slot is write protected To clear touch “Clear”
Description
The file system device is protected and no new files can be written to it.
Recommended action
Touch the Clear button to clear the error.
Card slot not initialized To clear touch “Clear”
Description
This file-storage component must be initialized before use.
ENWW
Tools for troubleshooting
291
To Next Page
Loading...