HP LaserJet Enterprise 500 color MFP M575 Series - Page 389

Table 2-48 Print modes under the Adjust Paper Types sub menu
Print Mode
●
Auto Sense Mode
●
Normal mode
●
Light Mode
●
Heavy Mode
●
Card Stock Mode
●
Transparency Mode
●
Transparency 2 Mode
●
Envelope Control
●
Label Mode
●
Tough Mode
●
Extra tough mode
●
Heavy Glossy Mode
●
Extra Heavy Mode
●
X-heavy glossy mode
●
Rough Mode
●
Card Glossy Mode
●
4 mm trans mode
●
Light Rough Mode
●
Mid-weight mode
●
Mid-wt glossy mode
NOTE: Not all print modes are available for all paper
types.
Resistance Mode Set to Up to resolve print-quality issues caused by poor
secondary transfer in low-humidity environments with resistive
or rough surface paper.
Humidity Mode With glossy film, set to High when the product is in a high-
humidity environment and print-quality defects occur on HP
Tough Paper or Opaque film.
With transparencies, set to High when the product is in a
high-humidity environment and print-quality defects occur on
color transparencies on the first page of a print job.
With all other paper types, set to High when the product is in
a high-humidity environment and light density occurs on the
first page of a print job.
Pre-Rotation Mode Set to On when horizontal banding occurs with the drum
pitch.
ENWW
Use manual print modes
361