◦
Z = 2: Tray 2
◦
Z = 3: Tray 3
Recommended action
1. Make sure that the tray is loaded with the correct paper size and that the sliding paper guides are
correctly adjusted.
2. Use the Tray/Bin manual sensor test to verify that the tray paper switch is correctly functioning.
3. If the error persists, replace the lifter assembly.
41.05.YZ Unexpected type in Tray <X>
Description
The product detected a different paper type than expected.
Y = Expected type, Z = Detected type
◦
Y = 0: Unknown
◦
Y = 1: Normal paper
◦
Y = 3: LBP transparency
◦
Y = 4 Glossy paper
◦
Y = 5: Gloss film
◦
Y = 6: Non-assured transparency
◦
Y = 7: Heavy paper
◦
Y = 8: Light paper
◦
Y = 9: Rough paper
◦
Y = A: Extra heavy glossy paper (glossy paper 3)
◦
Y = B: Heavy glossy paper (glossy paper 2)
◦
Y = C: Heavy paper 3
◦
Y = D: Heavy paper 2
◦
Z = 1: Normal paper
◦
Z = 3: LBP transparency
◦
Z = 4: Glossy paper
◦
Z = 5: Gloss film
◦
Z = 6: Non-assured transparency
◦
Z = 7: Heavy paper
204 Chapter 2 Solve problems ENWW
To Next Page
Loading...
