3. Install a new EIO disk.
4. Turn the product on.
EIO <X> disk spinning up
Description
The EIO disk product in the indicated slot is spinning up. Jobs that require disk access must wait.
◦
X = 1: Slot 1
◦
X = 2: Slot 2
Recommended action
No action is necessary.
EIO device failure To clear touch “Clear”
Description
The specified device failed.
Recommended action
Touch the Clear button to clear the message.
EIO file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Touch the Clear button to clear the message.
EIO file system is full To clear touch “Clear”
Description
A PJL file system command could not store something on the file system because the file system was full.
Recommended action
Touch the Clear button to clear the error.
EIO is write protected To clear touch “Clear”
Description
The device is protected and no new files can be written to it.
Recommended action
Touch the Clear button to clear the message.
ENWW
Tools for troubleshooting
229
To Next Page
Loading...
