Manually feed output stack Then touch "OK" to print second sides
Description
The product has printed the first side of a manual duplex job and is waiting for the user to insert the
output stack to print the second side.
Recommended action
The even-numbered pages of the two-sided document have printed. Follow the next steps to print the
odd-numbered pages.
1. Maintaining the same orientation, remove the document from the output bin. Do not discard blank
pages.
2. Flip the document over so the printed side is up.
3. Load document in Tray 1.
4. Touch the OK button to print the second side of the job.
Manually feed: [Size]
Description
This message appears when manual feed is selected, Tray 1 is not loaded.
Recommended action
Load tray with requested paper.
Manually feed: [Size] To continue, touch “OK”
Description
This message appears when manual feed is selected, Tray 1 is not loaded, and other trays are
available.
Recommended action
◦
Load tray with requested paper.
◦
If paper is already in tray, touch the Help button to exit the message and then touch the OK button
to print.
◦
To use another tray, clear paper from Tray 1, touch the Help button to exit the message and then
touch the OK button.
Manually feed: [Size] To use another tray, touch "Options"
Description
This message appears when manual feed is selected, Tray 1 is not loaded, and other trays are
available.
ENWW
Tools for troubleshooting
237
To Next Page
Loading...
