First level Second level Value Description
Cold Reset Paper When you perform a cold reset,
the paper size that is stored in
NVRAM is reset to the default
factory setting. If you replace a
formatter board in a country/
region that uses A4 as the standard
paper size, use this menu to reset
the default paper size to A4.
LETTER and A4 are the only
available values.
New Registration Roller Yes
No
Reset the counter for the
registration roller after replacing
the registration assembly.
PTT Test Mode (fax models only) Test the internal modem for the
analog fax accessory.
Hook Operations Off Hook
On Hook
Generate Random Data Select a
value from
the list.
Generate DTMF Tone Burst Select a
value from
the list.
Generate DTMF Continuous Tone Select a
value from
the list.
Generate Pulse Burst Select a
value from
the list.
Generate Tone Dial Number Enter dial
number.
Generate Pulse Dial Number Enter dial
number.
Generate Single Modem Tone Range:
1100–2100
Hz
Default =
2100 Hz
Line Measurements
Fax Transmit Signal Loss
Test Support Continuous Scan 2-sided
Save to Disk
308 Chapter 2 Solve problems ENWW
To Next Page
Loading...
