Tray 1 or Tray 2
Pickup and feed unit
The pickup and feed unit uses the following components and processes.
Cassette paper size detection/cassette paper detection
NOTE: To find the following components, see Photo sensors and switches on page 36.
●
PS3: cassette media-presence sensor
●
PS225: media width sensor (detects media width after the media enters the paper path)
Cassette pickup
NOTE: To find the following components, see Solenoids and clutches on page 38.
●
SL2: cassette (Tray 2) pickup solenoid
Tray 1 paper pickup
NOTE: To find the following components, see Photo sensors and switches on page 36 and Solenoids
and clutches on page 38.
●
PS205: Tray 1 (multipurpose tray) media-presence sensor
●
SL1: Tray 1 (multipurpose tray) pickup solenoid
40 Chapter 1 Theory of operation ENWW
To Next Page
Loading...
