CAUTION: ESD-sensitive part.
Unplug the power cord from the product before proceeding.
1. Disconnect one connector (callout 1), and then remove three screws (callout 2) that have a
triangular icon next to them.
Figure 1-256 Remove the LVPS (1 of 6)
2
1
2. Disconnect one connector (callout 1), and then release the wire harness from the retainer
(callout 2).
Figure 1-257 Remove the LVPS (2 of 6)
2
1
ENWW
Main assemblies
187
To Next Page
Loading...