Install a replacement fuser gear assembly
Use the following procedure to install a replacement fuser drive assembly or reinstall the original fuser
gear assembly.
1. Replacement fuser gear assembly: Before beginning, take note of the spacer (callout 1) on
the replacement fuser gear assembly.
Original fuser gear assembly: Proceed to the next step.
Figure 1-300 Install a replacement fuser gear assembly (1 of 3)
1
2. Fasten the replacement fuser gear assembly to the product with four screws (callout 1).
Figure 1-301 Install a replacement fuser gear assembly (2 of 3)
1
ENWW
Main assemblies
217
To Next Page
Loading...